数值风云

OpenFOAM® Basic Training

教程简介

In this OpenFOAM® tutorial series, we have prepared fourteen case examples that are designed to help users to learn the key utilities and features within OpenFOAM®, including mesh generation, multiphase modeling, turbulence modeling, parallel processing and reaction modeling. The base tutorial examples can be imported directly from the OpenFOAM® installation directory.

The tutorials should be primarily used for OpenFOAM® versions 7.0 and v1906, with differences in the running procedure between v1906 and 7.0 highlighted in blue boxes. So, simply ignore the blue boxes if you are running in version 7.0! The structure of each case example follow the below general structure:

  • Background: an introduction about the key topics explored in the tutorial and the relevant CFD
    theory
  1. Pre-processing: instructions on how to set up the correct case structure for a given problem using base case tutorials, with explanations on relevant dictionaries
  2. Running simulation: instructions on running the solver and its associated commands
  3. Post-processing: examining the results in OpenFOAM®’s post-processing application, ParaView V5.6.0

下载链接

OpenFOAM® Basic Training.pdf.part1.rar (4 MB)
OpenFOAM® Basic Training.pdf.part2.rar (4 MB)
OpenFOAM® Basic Training.pdf.part3.rar (4 MB)
OpenFOAM® Basic Training.pdf.part4.rar (4 MB)
OpenFOAM® Basic Training.pdf.part5.rar (1.5 MB)

7 个赞

已下载,感谢楼主。

楼主,想问一下,确认一下你上传的文件没有问题吧,我这那边试了一下part1和part4老解压报错,中断 :joy:

分卷压缩的解压时需要将所有分卷放在一起,另外单独的分卷也没有问题,我刚才下载了所有分卷并且解压成功,你再下一遍吧,可能网络传输的问题

好的,谢谢!我再试试

没问题了,搞定,谢谢